January 31, 2010

elastic gores in


The elastic hunt ended in spandex. After a great tip on where to find 12 inch elastic, (Thanks imblebee.) I realized the gores measured almost 12 1/2 inches long, before adding any seam allowance. Only after going with the spandex back up did I see the comment about sewing pieces of elastic together, (Thanks again imblebee!) which I really wish I would have done. Very Herve Leger. Much nicer than than what I ended up with, though what I ended up with isn't horribly bad. 

I made each gore two layers of spandex, and basted the layers together. I attached one side of the gore to the back of the corsetlet, seam allowance to the outside, trimmed, folded, and pressed just like the other flat felled seams. I pinned the folded edge in place, leaving the tail I patterned hanging out. The tail is there to give me something to work with, something to grip  when when working on this finicky area.


I sewed 1/16 from the fold just like before to make a flat felled seam on one side of the gore. Then I pinned the back piece with the gore to the side piece and treated them as one piece. One long seam was sewn to attach them, then I trimmed the seam allowance on the one side.


After the usual folding and pressing I pinned like crazy to hold everything in place for the last pass.


And here is a close up of join.


Not bad at all. I should say it took me an entire day to sew both gores in. I had to psyche myself up before each step. Once, I realized I was actually pacing back and forth thinking about the sewing involved, and I'm normally not a pacer. Here's a shot of the corselet so far.


Hook and eye time!

5 comments:

  1. That is breathtakingly beautiful fabric! The sewing is breathtaking as well!

    ReplyDelete
  2. Your work is just stunning. Beautiful detail.

    ReplyDelete
  3. I just found your blog and I love it! I'm a seamstress myself. I've done minimal corsetry, but always admired it. You have definitely inspired me to build a corset soon! Looking forward to more of your lovely work. Hearts -Erin

    ReplyDelete
  4. My admiration for your work is without words...I just discovered your blog...you are inspiring me to learn how to make a perfectly fitted bra with all the detail I always wanted...off to my stash ...thank you -- I have learned much and will revisit to absorb the techniques

    ReplyDelete
  5. Thank you herhimnbryn and Seamstress Erin. And Anonymous, you are too kind.

    ReplyDelete